Name: China Outdoor FTTH 8 Core Fiber Termination Box Manufacturers Suppliers Factory - Junpu Optoelectronic Equipment
Brand: Junpu
SKU: 242568452

Outdoor FTTH 8 Core Fiber Termination Box

This product integrates the function of splicing with splitting, suitable for the straight through or branch connection, and terminal connection in the optical system, as well as protection connection for cables and distribution pigtails. The cables can be spliced with indoor cables by splitting, to meet the requirements of traditional networks.

Send Inquiry

Description

Technical Parameters

Outdoor FTTH 8 Core Fiber Termination Box

8 Core Fiber Termination Box Integrates the function of splicing with splitting, suitable for the straight through or branch connection, and terminal connection in the optical system, as well as protection connection for cables and distribution pigtails.

General Information

product-789-160

Technical Data

Fiber bend radius: ≥40mm

Splice tray excess loss: ≤0.01dB

Temperature Range: - 40℃+ 60℃

Anti lateral pressure: ≥2000N / 10 cm

Shock resistance: ≥20N.m

Dimension(mm) W×D×H	19213347	Outer carton(mm) W×D×H	480470520
Material	ABS/PC	Product Net weight(Kg)	0.3
Cable diameter (mm)	≤F12	G.W (Kg)/carton	19.5
Cable in/out:	4/8	Quantity/carton	60
Max splice	8	Volume (M3)/carton	0.117

Dust proof, RoHS proof with IP-55 protection level

Integrated with 2 splice cassette and cable management rods.

Manage fiber in a reasonable fiber radius condition

Easy to maintain and extend the capacity

Fiber bend radius control more than 40mm

Suitable for the fusion splice or mechanical splice

Three layer design, large area for efficient cable management and storage

8 ports exit for drop cable 2*5mm

2pcs 1:4 or 1pc 1:8 splitter with steel tube slots on the bottom

Distribution cable can go through the box without cut, best choice for ftth indoor construction.

Operation Manual

1. Install adapters

2. Strip and clean the cable, keep it 0.8~1.2m long and 30- 50mm long of the strength member, and insert cable through the inlet, fix it by cable clamp, and fix strength member by special clamp.

3. Put the fiber to the tray, and let the end in the splicing slot after coiling

4. Install PLC splitter in the tray, and connect pigtails with adapters, and put the pigtails in the splicing slot, splice with the incoming cables.

(it can be used splicing only)

5. close the cover, plug outgoing pigtails through sealing rubber

6. Install the box with expansion screws, finish installation