48 Core ADSS Fiber Optic Cable

Description
ADSS cable is also called all-dielectric self-supporting optical cable. The composition of the ADSS optical cable is: A composite optical cable made by winding the optical fiber bundle on the central strengthening member. And then going through protective measures such as insulation, waterproof, reinforcement, and sheath. ZMS ADSS cable has the characteristics of full dielectric, no metal, non-conductivity, small cable diameter, high tensile force, low linear expansion coefficient, and wide temperature adaptation.
Features
Can be installed without shutting off the power.
Excellent performance. The maximum inductive at the operating point of jacket can reach 25kV.
Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back props.
Large span lengths and the largest span is over 200m.
Good performance of tensile strength and temperature.
The design life span is over 30 years.
Non-metal strength member
High Strength Kevlar yarn member
Replacing existing aerial ground wires
Upgrading communications lines of power systems
Synchronous planning and designing when new aerial power lines are to be constructed
Conducting large fault short-circuit current and providing lightning protection
Application
FTTH Network GPON, EPON.
Rural communication
Local trunk line
CATV
Computer networks system
Specification
|
Fiber Count |
2-144 |
|
San m |
50-1000 |
|
Nominal Radian % |
1-3 |
|
Nominal Load N |
800-100000 |
|
Wind Speed m/s |
≦30 |
|
Cable Outer Diameter mm |
10.5-18.0 |
|
Cable Weight Kg/km |
130-260 |
|
Tensile Strength(N/100mm) |
2200 |
|
min Bending Radius(mm) |
Static |
|
dynamic |
Detailed Images





















