10/100/1000M Gigabit Media Converter
Description:
TH Series 10/100/1000M SM Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100/1000M UTP interface TX and 1000
M Fiber interface (FX). The traditional 10/100/1000M Fast Ethernet can be extended to a distance of 90km through a Single Optical Fiber link. The performance and quality of the products are excellent because of adopting the latest IC. It must be used in couples because the transmitted optical differs from the received optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of the network. The Series product with a reasonable price is specially designed for network end-users.
Feature:
The transmission of channel optical signals can be completed by a single fiber. It has doubled in the quantity of fiber data transmission compared with the twin fiber type.
UTP port supports MDI / MDI-X auto crossover Supporting flow control
Supporting 1552 Byte packet
Internal circuits of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users
Specification:
|
Operating standards |
IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base - TX/FX Fast-Ethernet IEEE802.3z/ab 1000 Base FX/TX 1000M- Ethernet IEEE802.3x |
|||
|
MAC address table |
1K Mac |
|||
|
Connector |
RJ-45 10/100/1000Mbps |
|||
|
RJ45 port |
Auto - MDI/MDIX |
|||
|
UTP |
Cat. 5 UTP (the max distance up to 100m) |
|||
|
Fiber Connector |
Fiber type |
wavelength |
||
|
SC |
1310/ 1550nm |
|||
|
Fiber Singlemode |
8.3/ 125, 8.7/ 125, 9/ 125, 10/ 125 μm(the max distance up to 90km) |
|||
|
TX / RX Power |
--14 ~ --6dBm |
|||
|
Transmission distance: |
20Km |
|||
|
frequency offset |
±125 ,000bps(or±100ppm ) |
|||
|
MTU |
More than 9036 bytes |
|||
|
Humidity |
5% ～ 90% |
|||
|
Full Duplex |
IEEE802.3x |
Half Duplex |
Back pressure |
|
|
LED Indicator |
Power, FX 1000, FX Link/Act, TX 1000, TX FDX, TX Link/Act |
|||
|
Ambient temperature |
0 ～ 50℃ |
|||
|
Storage temperature |
-20 ～ +70℃ |
|||
|
Power |
AC 110V - 220V to DC 5V; DC48V to DC 5V/2A |
|||
|
Type |
Fiber type |
connector |
Wavelength |
TX/ RX power |
Receiving Sensitivity |
Max. distance |
Link Budget |
|
HTB-3100 A/ B-25 |
SM |
SC |
1310/ 1550nm |
-14~-6dBm |
-32dBm |
25km |
15dBm |
|
HTB-3100 A/ B-40 |
SM |
SC |
1310/ 1550nm |
-5~0 dBm |
-35dBm |
40km |
30dBm |
|
HTB-3100 A/ B-60 |
SM |
SC |
1310/ 1550nm |
-8~-2 dBm |
-36dBm |
60km |
28dBm |
|
HTB-3100 A/ B-80 |
SM |
SC |
1310/ 1550nm |
-3~0 dBm |
-37dBm |
80km |
34dBm |
LED Description:
|
|
||
|
LED |
Color |
Function |
|
FX 100 |
Green |
Lit when 100Base-FX operation |
|
FX Link/ACT |
Green |
Lit when the fiber cable connection with the remote device is good. Bliks when any FX traffic is present |
|
Power |
Green |
Lit when +5V Power is available |
|
FDX/Col |
Green |
Lit when full-duplex mode is enabled. Blinking when collision is present |
|
TX 100 |
Green |
Lit when 100Base-TX cable operation |
|
TX Link/ACT |
Green |
Lit when the TP cable connection with the remote device is good. Blinks when any traffic is present |
Technical test:
Product Image:
Power supply:
Customize:
Our company can support custom power adapters with different plugs
Package :
1. Transceiver Dimensions: External power 70 × 26 × 93mm; built-in 120 × 30 × 140mm.
2. outer Dimensions: 95mm × 71mm × 25mm
3. Package: ESD package,Carton
Note: A terminal is 1310nm-TX, and B terminal is 1550nm-TX Each pair contains 2 packages
10/ 100M Singlemode Single Fiber Converters must be used and ordered in couples. One set of A must be connected with another set of B for use. A port transmitted the optical wavelength 1310nm, and received the optical wavelength 1550nm; B port transmitted the optical wavelength 1550nm, and received the optical wavelength 1310nm. The distance of fiber is up to 25, 40, 60, 80km.