16 Core Fiber Pre-connectorized Distribution Box

16 Core Fiber Pre-connectorized Distribution Box

16 Core Fiber Pre-connectorized Distribution Box is widely used as a termination point for the feeder cable to connect with the drop cable. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building. It can be used indoor or outdoor.

Features:

Compact design, lightweight and easy installation.

Made by high-quality material (PC+ABS)

6 splicing tray (12F), max capacity up to 72F, plus 1 tray for 2pcs 1X8 PLC splitters or 1X16 PLC splitter

Applicable for 1 oval port, 2 branch ports and 16pcs hardened SC/APC adaptors

Waterproof level: IP65

Installation method: Pole mounting, Wall mounting, Aerial mounting

Specification:

1. Environmental requirement:

Working temperature: -40 ℃ ～ + 85 ℃

Hygrometry: ≤85% (+ 30 ℃)

Atmospheric pressure: 70KPa ~ 106Kpa

2. Main technical data sheet:

Insertion loss: ≤0.15dB

UPC return loss: ≥50dB

APC return loss: ≥60dB

3. Technical data sheet for lightning:

The insulation resistance between the grounding device and the metal parts of the case is not less than 2MΩ / 500V (DC); IR≥2 MΩ / 500V.

The voltage resistance between the grounding device, and the box and its metal parts is not less than 3000V (DC) / min, no puncture, no flashover; U≥3000V

1. Total enclosed structure.
2. Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage,
distribution...etc all in one.
4. Cable, pigtails, and patch cords are running through their own paths without disturbing each other, micro type PLC splitter installation, easy maintenance.
5. Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation.
6. Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use.
Specification
Environmental requirement
Working temperature: -40ºC~+85ºC
Relative humidity: ≤85% (+30ºC)
Atmospheric pressure: 70KPa~106Kpa
Main technical datasheet Insertion loss: ≤0.15dB
UPC return loss: ≥50dB
APC return loss: ≥60dB
Thunder-proof technical datasheet
The insulation resistance between the grounding device and the metal parts of the
box is no less than 2´104MΩ/500V (DC); IR≥2´104MΩ/500V.
The voltage resistance between the grounding device, and the box and its metal parts is no less
than 3000V (DC)/min, no puncture, no flashover; U≥3000V

We sincerely invite you to send us an inquiry for further details.
JUNPU Cares About Every Single Details Of The Product For You!