ST to ST jumper
ST jumpers feature OFNR (riser grade) jacketing and ST-style connectors. Ceramic ferrules provide precise alignment; rigorous functional testing ensures optimal cable performance; used for connecting to patch panels and network equipment using ST-type connectors and requiring 9/125 single-mode cabling; connectors are PC polished; OFNR (Riser Grade) sheathing meets strict building codes.
FC to FC jumper
An FC patch cord is a multi-mode or single-mode fiber optic cable with connectors on both ends for quick and easy connection to CATV, optical switches or other telecommunications equipment. Its thick security layer facilitates the connection of optical transmitters, receivers and junction boxes.
LC to LC jumper
LC patch cords are critical to data center and network deployments, providing the necessary connections between fiber optic equipment. LC cable assemblies provide a simple solution for installing and maintaining fiber optic cables in high-density applications. Use LC jumpers to easily change or rearrange your wiring without reconfiguring the entire system. Both ends of an LC fiber optic patch cord are visually identical and can be distinguished simply by the orientation of the fiber optic cable.
SC to SC jumper
SC jumpers are used to connect network devices for signal routing. SC, short for standard connector or subscriber connector, is one of the most popular fiber optic cable connectors in the networking industry. SC jumpers can be used to connect datacom and telecommunications equipment; in GPON, EPON, GBIC and MADI applications.
SC to LC jumper
SC to LC Jumper: Standard Cable (SC) to Low Profile Cable (LPC) is a conversion from a larger type of connector to a smaller type of connector, connecting devices with small form factor connectors (SC) to devices with Devices with larger size connectors (LC). It can connect any device with a single-mode fiber optic connector to a multi-mode connection. SC connectors are typically used on the transmitting end of a line, while LC connectors are used on the receiving end. As the name suggests, LC connectors have a smaller profile than SC and are typically used in high-density applications such as data centers and telecommunications.
SC to FC Jumper
A SC to FC patch cord is a cable with a connector on one end and a connector on the other end. These connectors are designed specifically for fiber optic cables. These cables provide the connection between transceivers and fiber optic equipment. They consist of a thin plastic sheath over a single glass or plastic fiber core. The connectors at the end of each cable usually have molded jackets and thumbscrews for protection. They can also connect two transceivers. These cables feature SC connectors and FC on one end and are compatible with single-mode and multi-mode specifications. The connectors (SC, ST, LC) are on the other end.
